3Com 5500G Switch User Manual


 
Front Panel 11
Management Ethernet port
You can use the 10/100Base-TX management Ethernet port on the
OSN|M’s front panel for management only; not for exchanging data. Use
this port to log into the OSN|M’s Linux system through SSH, and then to
configure the Linux system. Refer to Table 3 for the management
Ethernet port specifications.
Interface standard EIA/TIA-232
Cable type Asynchronous serial port cables
Baud rate (bps)
300
1200
2400
4800
9600 (default)
19200
38400
56000
115200
Table 3 Management Ethernet port specifications
Specification Description
Connector type RJ45
Number of connectors 1
Interface standard IEEE 802.3u
Cable type Category 5 cables (forward compatible)
Working mode
Full/half duplex
10/100 Mbps autosensing
Supported frame format
Ethernet_II
Ethernet_SNAP
Table 2 Console port specifications
Specification Description