Filter
Top Products
A-8 APPENDIX A: CLI COMMAND DESCRIPTION
Fltr - Number of packets received from this MAC station that were filtered out
(discarded)
Fwd - Number of packets received from this MAC station that were forwarded
TxPkt - Number of packets forwarded to this MAC station
TxOctets - Number of bytes forwarded to this MAC station
list connection events Displays the contents of the Connection Event Table. This table displays
informational and error messages regarding the establishment of wide are
connections.
list dns servers Displays DNS Name Servers, which you configured using the add dns server
command. The domain name and the server address are listed for each DNS
server.
list facilities Displays the system facilities (processes) currently running, plus the default log
level. The log level is the severity of error that facility will produce syslog entries
for. You can change the log level using the set facility loglevel command.
list filters Displays all the filter names in the filter table, which you previously defined using
the add filter command. You can remove filters using delete filter. The command
lists the filter file name, the status of the filter, and the protocols the file applies to.
For example:
Filter Name Status Protocols
easyfilter.fil NORMALBR BR-ETH
list files Displays the files currently stored in the FLASH file system. You can remove files
using delete file, but you can add them using TFTP only.
list interfaces Displays the installed interfaces, along with their operational status, administration
status, and interface index. If an interface is down, you can use enable interface to
try to bring it up. The command lists:
■ Index - number used to identify the interfaces position in the table
■ Name - interface name: eth:1 or atm:1
■ Oper Status - current, operating status of interface; UP or DOWN
■ Admin Status - administrative status you designated interface to be, up or
down. If it doesn’t match Oper Status, a problem exists with the interface.
list ip addresses Displays the IP address for each interface. It lists:
■ Address - IP address of the interface
■ Bcast Algo - broadcast algorithm used
■ Reassembly Max Size - maximum allowable size of packet that can be
reassembled from a fragmented packet