Filter
Top Products
4
USING THE
CENTRAL CONFIGURATION MANAGER
You should use the Local Configuration Manager to initialize each of the NJ220
IntelliJacks installed on your network. Once you have completed that step, you can
manage all of them with the Central Configuration Manager.
Install this program on any computer on your network you want to use as a
central management console (See chapter 2, “Installing the Configuration
Managers” for help). You can use the same machine that has your SNMP-based
management platform. The Central Configuration Manager will be able to
configure and manage all of the IntelliJacks that reside on your network.
We recommend that you keep the Central Configuration Manager (CCM) running
on your machine. Information such as traps and alerts are sent tot he CCM on a
periodic basis. If you shut off the machine or close the configuration manager, you
will not be able to receive this information.
Discovering NJ220
Devices on Your
Network
In order to manage the NJ220 IntelliJacks on your network, the Central
Configuration Manager needs to include them in its database. The easiest way to
add new NJ220 IntelliJacks to the database is to use the device discovery tool
included in the Central Configuration Manager.
The first time you run the Central Configuration Manager, it will automatically
take you to the Discovery window as shown under step two below. To discover
new devices on your network, run the following steps: