Filter
Top Products
56 CHAPTER 4: USING THE CENTRAL CONFIGURATION MANAGER
The values that remain unchanged when you click Restore Base Configuration are:
• Group Name
• Location Name
• Password
• IP Address
• DHCP Settings
• SNMP Get, Set, and Trap Community Strings
• SNMP Trap Destination IP Address
• Subnet Mask
• Gateway
• Device Log (stored in EEPROM)
• Management Port VID
802.1X Supplicant Status Disabled
802.1X Supplicant User Name and
Password
Blank
Port Setting Default Value
State Forwarding
Link Auto negotiation
Flow Control Off
MDI[X] Force MDI
Multicast Limit 3%
Priority Lookup Tag & IPV4
Port Priority 0 or 1
VLAN ID 1
802.1Q VLAN Mode Disable VLANs
Data Rate Limit All frames
Maximum Data Rate No limit
Global Setting Default Value