Communication
63
Powerware
®
Prestige Series Installation andOperator’sManual forIBM Applications (3000 VA) Uncontrolled Copy
Z > Set Baud Rate allows you to select a new baud rate. The Select
Baud Rate Menu displays a list of baud rate options.
5. To save the configuration settings, type S at the Main Menu
prompt. The UPS operates and communicates under the new
configuration, and defaults to these settings each time it is
started.
If you want to abandon the selections you have made, type
Q to
quit.
NOTE Any changes you make to the UPS communications configuration must
correspond to the communications equipment you are using. In particular, new baud
rate selections for the UPS must match your communications equipment.
Power Management Software
Power management software allows you to monitor UPS operations
automatically. To use OnliNet or LanSafe software, the UPS must be
configured for any one of the Data Dump, Terminal, or Printer modes;
however, Printer mode is preferred.
OnliNet provides multiple levels of UPS monitoring and control, as well
as automatic shutdown for many different operating systems. If you
have any questions or would like further information, see Chapter 8,
“AS/400 Service” on page 75 for the number to call in your location.