Filter
Top Products
3M™ MicroTouch™ Display M1500SS User Guide 13
3M Touch Systems, Inc. Proprietary Information
Document #19-258 Rev AH
Figure 3 Disassembling the Yoke & Base for Arm Mounting
Countertop Base Mounting Option
Keyhole slots in the bottom of the base plate enable you to secure the unit to a desktop or
countertop. Use standard screws in the desktop or countertop and then slide the base
plate on for a secure fit.
Note: A full size template has been included in the back of this manual for your
convenience. Simply tear out the template and drill directly through the holes indicated
to secure your display to any surface.
Figure 4 Keyhole Mounting Slots
Step 1 -- Unlock the yoke. With the unit laying face
down safely and securely on a nonabrasive surface,
remove the two screws connecting the top of the yoke.
Lift yoke and pull down to disengage tabs to remove.
Step 2 -- Remove the bottom two screws holding the
hinge cover in place. Remove the small hinge cover.
Step 3 -- Remove the inner four screws holding the
base to the display and gently remove the base.