Filter
Top Products
3M™ MicroTouch™ Display M1500SS User Guide 15
3M Touch Systems, Inc. Proprietary Information
Document #19-258 Rev AH
Note: When the adjustment knob is horizontal it is locked; when it is in the vertical
position it is unlocked.
Always maintain adequate ventilation to protect the display from overheating and to
ensure reliable and continued operation.
Installing the Video Card and Video Driver
Before you can connect your touch display, make sure your computer has a video card
and driver already installed for the display. The video driver is supplied by the video
card manufacturer and may be found on the disks that came with your computer. If you
need information on installing a video card or video driver, refer to your computer
documentation for instructions.
Supported Video Display Modes and Refresh Rates
Your video card should support one of the display modes specified in Table 1. If you
select an unsupported video mode, the display may stop working or display
unsatisfactory picture quality.
Table 1. Applicable Display Mode and Refresh Rate
Display Mode Refresh Rate
VGA (640 x 480) 60
72
75
US Text (720 x 400) 70
SVGA (800 x 600) 56 Hz
60
72
75
XGA (1024 x 768) 60
70
75
Configuring the Display Settings
After you connect your M1500SS Display and turn on your computer, you may need to
configure one or more of these display settings. The ideal settings for this display are as
follows:
• Display mode (also called desktop area or video resolution) 1024 x 768
• Refresh rate (also called vertical scan rate or vertical sync) 60 Hz
• Color depth (also called color palette or number of colors) at least 16-bit (high color)