Filter
Top Products
14 3M™ MicroTouch™ Display M1500SS User Guide
3M Touch Systems, Inc. Proprietary Information
Access to the Video Controls
The controls for adjusting the video display are located on the front of the M1500SS
Display. These buttons let you display the on-screen menu and adjust the phase, image
position, contrast, and brightness. Make sure you have unobstructed access to the video
controls once the M1500SS Display is installed. Refer to Chapter 3 for more details on
these controls.
Figure 5 Video Display Controls
Adjusting the Viewing Angle
The yoke and spine were designed with touch stability in mind. This innovative design
keeps the display face stable during touch. The unit can be adjusted to any locked
position from 0 up to 60 degrees from vertical. This allows for users of different heights
to view the display at the angle that best suits them with no degradation in touch
stability.
Turn the positive locking mechanism adjustment knob one quarter turn (horizontal to
vertical) to loosen. Adjust the M1500SS Display by pushing on the top front of the
display until the screen is at the best viewing angle for you. Then turn the adjustment
knob a 1/4 turn back to lock in place. To raise the display back to vertical, unlock the
adjustment knob, lift slightly on the adjustment knob and pull up.
Figure 6 Viewing Angle Adjustable from 0 up to 60 degrees
SELECTŻ/Left Ź/Right
LED
Microphone
MENU