Filter
Top Products
3M™ MicroTouch™ Display M1500SS User Guide 19
3M Touch Systems, Inc. Proprietary Information
Document #19-258 Rev AH
CAUTION
To avoid the risk of electric shock which may result in minor or moderate
injury:
The socket-outlet should be installed near the equipment and should be easily
accessible.
Use a power cable that is properly grounded. Always use the appropriate AC cord
certified for the individual country. Some examples are listed below:
USA UL
Switzerland SEV
Canada CSA
Britain BASE/BS
Germany VDE
Japan Electric Appliance Control Act
5.
Connect the power cable to the AC/DC supply. Connect the other end to the
appropriate AC outlet.
Figure 10 Connecting the M1500SS Cables to your Computer
You should be sure all cable connections are secure -- tighten all cable screws. Shaking
and vibration may dislodge cables that are improperly connected.
Route all wiring and cabling away from heat sources and sharp metal edges to avoid
damage. Also, keep the touch sensor cable away from sources of electromagnetic and
radio frequency interference.
WARNING
To avoid the risk of electric shock which could result in serious injury or death:
• Do not use a damaged power supply.
• Do not use a power cord that is frayed or otherwise damaged.