Filter
Top Products
24 3M™ MicroTouch™ Display M1500SS User Guide
3M Touch Systems, Inc. Proprietary Information
Auto Config
To perform an Auto Config, press the Ż/left arrow key once then press SELECT. The
Main Menu item Auto Config is used to adjust the configuration of the phase clock
vertical and horizontal position automatically. A confirmation box is displayed to
confirm the user selection. The default selection in the box is NO and is highlighted by a
red bar.
If the Select key is pressed, the main menu is redisplayed and nothing is changed. When
“Yes” is selected an automatic configuration is started. After the process is completed
successfully, a confirmation box “Does this image look correct?” is displayed. If the
image looks the way you want it to look, select “Yes” to save this setting and exit the
confirmation box. If image does not look the way you want, select “No” to go to
IMAGE > PHASE to adjust the phase manually to the best image quality. Refer to that
section for more details.
Brightness
Selecting the Brightness option will allow you to adjust the brightness of the display.
Adjust the brightness using the Ż/left and Ź/right arrow buttons, and press SELECT to
confirm the new setting.