Filter
Top Products
Troubleshooting
DEFRAGMENTING
(Printer stops.)
The printer is defragmenting memory.
CAUTION Do NOT turn off the
printer power during defragmenting.
Doing so can damage the printer.
Allow the printer to finish
defragmenting. If you get this
error message frequently, check your
label formats. Formats that write to and
erase memory frequently may cause
the printer to defragment often. Using
properly coded label formats usually
minimizes the need for defragmenting.
If this error message does not go
away, contact 3M Service. The printer
requires service.
Free up some of the printer’s memory
by adjusting the label format or printer
parameters. One way to free up
memory is to adjust the print width to
the actual width of the label instead
of leaving the print width set to the
default. See Zebra XiIIIPlus User
Guide (PDF on drivers CD).
Ensure that the device, such as flash
memory or PCMCIA card, is installed
and not write-protected or full.
Ensure that the data is not directed
to a device that is not installed or is
unavailable.
OUT OF MEMORY
(function)
There is not enough memory to perform
the function specified on the second
line of the error message.
See Zebra XiIIIPlus User Guide (PDF
on drivers CD) for more information
about the specified function.
Copyright © 2009, 3M. All rights reserved.
41