8e6 Technologies TAR Network Card User Manual


  Open as PDF
of 76
 
42 8e6 ThreaT analysis reporTer Quick sTarT Guide
System Status screen
The System Status screen contains the following information:
lan1 interface for web access and R3000 communications: LAN1 IP address
and netmask specied in screen 3 (Congure Network Interface), and current status
(“Active” or “Inactive”)
lan2 interface for bandwidth monitoring: LAN2 IP address and netmask specied
in screen 4 (Congure Network Interface), and current status (“Active” or “Inactive”)
Default gateway IP address specied in screen 5 (Congure default gateway)
Congure host name specied in screen 7 (Congure Host Name)
DNS server IP address(es) specied in screen 6 (Congure Domain Name Servers)
Current status of the Threat Analysis Reporter
Current Version of the Threat Analysis Reporter software
NOTE: Modications can be made at any time by returning to the specic
screen of the Quick Start menu.
Log Off, Disconnect the Peripherals
A. After completing the Quick Start setup procedures, return to the Quick Start menu
screen and press 9 to log out.
B. Disconnect the peripherals from the Threat Analysis Reporter.
C. Proceed to Physically Connect the Unit to the Network.
•
•
•
•
•
•
•
 previous next