Filter
Top Products
58 8e6 ThreaT analysis reporTer Quick sTarT Guide
ER:
Respond to the question “Do you have an Enterprise Reporter?” by clicking the radio
button corresponding to either “Yes” or “No”.
If “No” was selected, click SAVE > at the bottom right of the screen to go to Step 3.
If “Yes” was selected, the IP address and Server Name elds display in place of the
radio buttons. The < Back button displays above the Server Name eld.
NOTE: To change your answer from “Yes” to “No,” click the < Back button to
re-display the question “Do you have an Enterprise Reporter?”
A. Enter the IP address of the ER server to be used with the Threat Analysis Re-
porter. In our example, this is: 200.10.101.76.
B. Enter the Server Name of the ER server to be used with the Threat Analysis
Reporter. In our example, this is: er4logo.
C. Click SAVE > at the bottom right of the screen to save all settings entered during
the wizard process, and to go to Step 3.
NOTE: Upon clicking SAVE > the wizard will verify whether the settings made
in Step 1 and Step 2 are correct. If there is an error in any entry made, an orange
asterisk ashes beside the eld in which the error was made. Correct the error and
click SAVE > again to go to Step 3.
•
•