Filter
Top Products
-
38 -
Power Save Mode
Choose from CAM (Constantly Awake Mode) or PSM (Power Saving
Mode.)
RTS Threshold
Shows the RTS Threshold of the device.
Fragment Threshold
Shows the Fragment Threshold of the device.
Add
Click to add a profile from the drop-down screen.
System Configuration tab:
Profile Name: Users can enter profile name, or use default name defined
by system. The default is PROF# (#1, #2, #3....).
SSID: The SSID is the unique name shared among all wireless access
points in the wireless network. The name must be identical for all
devices and wireless access points attempting to connect to the same
network. Users can use pull-down menu to select from available access
points.
Network Type: There are two types, Infrastructure and Ad hoc modes.
• The Infrastructure is intended for the connection between wireless
network cards and an access point. With the Wireless LAN USB
Adapter, users can connect wireless LAN to a wired global network
via an access point.
• The Ad hoc lets users set a small wireless workgroup easily and
quickly. Equipped with the Wireless LAN USB Adapter, users can
share files and printers between each PC and laptop.
Tx Power: Transmit power, the amount of power used by a radio
transceiver to send the signal out. Select the Tx power percentage from
the pull-down list including Auto, 100%, 75%, 50%, 25%, 10% and
Lowest.
Preamble: This function will show up when Ad-hoc network type be
selected. A preamble is a signal used in wireless environment to
synchronize the transmitting timing including Synchronization and Start