Filter
Top Products
-
46 -
Link Status Tab
Status
Shows the current connected AP SSID and MAC address. If there is no
connection existing, it will show Disconnected.
Extra Info
Shows the link status and Tx power percentage.
Channel
Shows the current channel in use.
Authentication
Authentication mode used within the network, including Unknown, Open,
Shared, WPA-PSK, WPA2-PSK, WPA and WPA2.
Encryption
Shows the encryption type currently in use. Valid value includes WEP,
TKIP, AES, and Not Use.
Network Type
Network type in use, Infrastructure for BSS, Ad-Hoc for IBSS network.
IP Address
Shows the IP address information.
Sub Mask
Shows the Subnet Mask information.
Default Gateway
Shows the default gateway information.
Link Quality
Shows the connection quality based on signal strength and TX/RX packet
error rate.
Signal Strength 1
Shows the Receiving signal strength, users can choose to display as
percentage or dBm format.
Noise Strength
Shows the noise signal strength in the wireless environment.
Transmit
Shows the current Link Speed and Throughput of the transmit rate.
Receive
Shows the current Link Speed and Throughput of receive rate.
Link Speed
Shows the current transmitting rate and receiving rate.
Throughput
Shows the transmitting and receiving speed of data.
Advanced
This Advanced page provides advanced and detailed settings for the wireless network.