Filter
Top Products
Chapter 2 31
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed with 24-
hour format.
Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
Total Memory This field reports the total memory size. Memory size is
fixed to 3071 MB.
N/A
Video Memory This field reports the video Memory size. N/A
Quick Boot
Enables the boot sequence to skip some processes to
boot up more quickly.
Option: Enabled or
Disabled
Network Boot Enables, disables the system boot from LAN (remote
server).
Option: Enabled or
Disabled
F12 Boot Menu Enables or disables the Press <F12> to display boot
menu message during startup.
Option: Enabled or
Disabled
D2D Recovery Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Option: Enabled or
Disabled
SATA Mode Control the mode in which the SATA controller should
operate.
Option: ACHI or IDE
InsydeH20 Setup Utility Rev 3.5
Information Main Advanced Security Power Boot Exit
Item Specific Help
System Time [13:04:04]
System Date [10/10/2008] This is the help for the
hour field. Valid range
Total Memory 3071 MB is from 0 to 23.
Video Memory [64MB]
INCREASE/REDUCE : F5/F6
Quick Boot [Enabled]
Network Boot [Enabled]
F12 Boot Menu [Disabled]
D2D Recovery [Enabled]
SATA Mode [ACHI]
F1 Help
↑↓
Select Item F5/F6 Change Values F9 Setup Default
ESC Exit
←→
Select Menu Enter Select
X
Submenu F10 Save and Exit