Filter
Top Products
Chapter 3: Replacing notebook components
83
5 Remove the screws connecting the power button board to the notebook.
6 Replace the power button board, then replace the screws removed in Step 5.
7 Make sure the black connector clip on the new power button board is swung
upward, insert the cable into the connector, then swing the clip down to lock the
connector in place.
Important: The cable is correctly oriented if it is not twisted and the blue
band is facing up.
8 Close the keyboard compartment by following the steps in “Replacing the
keyboard” on page 80.
9 Replace the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 78.
ScrewScrewScrew