Filter
Top Products
Chapter 2 - System Board 2-13
2.10 Modem Ring-in Function
The Modem Ring-in function enables the system to resume from suspend mode by
monitoring the fax/modem (or any device of similar type) activities. Any signal or
activity detected from the Modem ring-in connector automatically returns the system to
normal operation. Refer to Figure 2-2 for the location of the Modem ring-in connector
(CN1) on the system board.
2.11 Wake-on LAN Function
The system supports the Wake-on LAN feature via the onboard Wake-on LAN connector
(CN2). This special feature allows the system to be activated via a network. Common
network functions, such as remote access, file sharing, etc. are also supported.