Filter
Top Products
Chapter 3 - BIOS Utility 3-17
ECP DMA Channel
This item becomes active only if you select Extended Capabilities Port (ECP)
as the operation mode. It allows you to assign DMA channel 1 or DMA channel 3 for the
ECP parallel port function (as required in Windows 95).
3.5.3 Onboard Device Settings
The Onboard Device Settings menu allows you to configure the device controllers
available onboard. Selecting this option from the Onboard Peripherals menu displays the
following screen:
Onboard Device Settings
Floppy Disk Controller ..............[Enabled ]
IDE Controller ......................[Both ]
PS/2 Mouse Controller ...............[Enabled ]
USB Host Controller .................[Enabled ]
USB Legacy Mode ...................[Disabled]
Onboard Audio Chip ..................[Enabled ]
Onboard Ethernet Chip ...............[Enabled ]
Floppy Disk Controller
This parameter lets you enable or disable the onboard floppy disk controller.
IDE Controller
Set this parameter to Primary to enable only the primary IDE channel; Secondary to
enable only the secondary IDE channel; Both to enable both primary and secondary IDE
channels; or Disabled to disable the onboard IDE controllers.