Filter
Top Products
Chapter 3 67
Disassembling the LCD Module
1. Remove the four LCD screw caps.
2. Then remove the six screws fastening the LCD bezel.
3. Remove one screw holding the LCD support on one side.
4. Remove another screw holding the LCD support on the other side as shown.
5. Open the cover as shown.
6. Open the other cover protecting antenna set as shown then remove the LCD support.
7. Detach the LCD bezel from the LCD module carefully.
8. Remove the four screws fastening the LCD assembly.
9. Remove the two screws fastening the finger board.
10. Turn over the finger board and disconnect the cable then remove the finger board.
11. Remove the two screws fastening the power board.
12. Lift the LCD as shown to take out the power board.