Filter
Top Products
144 Chapter 5
4. Peel back the Wireles LAN Card mylar and short the G2 pad.
5. Reconnect the RTC battery and reassemble the unit.
BIOS Recovery by Crisis Disk
BIOS Recovery Boot Block:
BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS
initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous
BIOS flashing process failed.
BIOS Recovery Hotkey:
The system provides a function hotkey: Fn+Esc, for enable BIOS Recovery process when system is powered
on during BIOS POST. To use this function, it is strongly recommended to have the AC adapter and Battery
present. If this function is enabled, the system will force the BIOS to enter a special BIOS block, called Boot
Block.
Steps for BIOS Recovery by USB Flash Crisis Disk:
Before doing this, a Crisis Diskette should be prepared ready in hand. The Crisis Diskette could be made by
executing the Crisis Disk program in another system with Windows XP OS.
Follow the steps below:
1. Plug in a blank USB disk.
2. Launch the wincrisis.exe program to create a USB Crisis Disk.
3. Select Create MINIDOS Crisis Disk.
4. Click Start to initiate the process.
5. Click OK to override the warning dialog.
IMPORTANT:The Crisis Disk program will overwrite all data on any drive that you use as a crisis disk.
6. Copy the KAV60.fd BIOS file into USB flash disk root directory.
NOTE: Do not place any other *.fd file in the USB flash disk root directory.