Filter
Top Products
Chapter 3
`BIOS Information
46
IDE Secondary
Channel Master
Specifies the current
configuration of the IDE
device connected to the
master port of the secondary
IDE channel.
Drive type,
capacity
IDE Secondary
Channel Slave
Specifies the current
configuration of the IDE
device connected to the slave
port of the secondary IDE
channel.
Drive type,
capacity
Total Memory Specifies the total amount of
onboard memory. The
memory size is automatically
detected by BIOS during the
POST. If you install additional
memory, the system
automatically adjusts this
parameter to display the new
memory size.
Memory size in
MB
1st Bank Indicates the type of DRAM
installed in the DIMM 1
socket. The None setting
indicates that there is no
DRAM installed.
DIMM type,
capacity in MB
2nd Bank Indicates the type of DRAM
installed in the DIMM 2
socket. The None setting
indicates that there is no
DRAM installed.
DIMM type,
capacity in MB
Serial Port 1 Shows the serial port 1
address and IRQ settings.
Address, IRQ
Serial Port 2 Shows the serial port 2
address and IRQ settings.
Address, IRQ
Parallel Port Shows the parallel port
address and IRQ settings.
Address, IRQ
Parameter
Description Format
V76MSE.book Page 46 Wednesday, May 19, 1999 1:25 PM