Filter
Top Products
29 Chapter 2
Standard CMOS Features
Select “Standard CMOS Features” from the main menu to configure the drives installed in your system.
The following screen shows the Disk Drives menu:
The following table describes the parameters found in this menu.
Parameter Description Options
Date Lets you set the date following the weekday-month-day-
year format
Weekday: Sun, Mon....Sat
Month: Jan, Feb...Dec
Day: 1 to 31
Year: 1980 to 2079
Time Lets you set the time following the hour-minute-second
format
Hour: 0 to 23
Minute: 0 to 59
Second: 0 to 59
IDE Channel 0 Master Lets you configure the hard disk drive connected to the
master port of IDE channel 0.
To enter the IDE Channel 0 Master setup, press
e.
The IDE CD-ROM is always automatically detected.
(Show the Status:)
None
HDD or CD-ROM Number
IDE Channel 0 Slave Lets you configure the hard disk drive connected to the
slave port of IDE channel 0.
To enter the IDE Channel 0 Slave setup, press
e.
The IDE CD-ROM is always automatically detected.
(Show the Status:)
None
HDD or CD-ROM Number
IDE Channel 1 Master Lets you configure the hard disk drive connected to the
master port of IDE channel 1.
To enter the IDE Channel 1 Master setup, press
e.
The IDE CD-ROM is always automatically detected.
(Show the Status:)
None
HDD or CD-ROM Number