Acer Veriton 5600GT/5600V Personal Computer User Manual


 
41 Chapter 2
The following table describes the parameters found in this menu.
Parameter Description Options
ACPI Function Enabled/Disable ACPI Function. Enabled
Disabled
ACPI Suspend Type This item specifies the power saving modes for
ACPI function. Options are:
S1/POS: The S1 sleep mode is a low power
state. In this state, no system context is lost
(CPU or chipset) and hardware maintains all
system context.
S3/STR: The S3 sleep mode is a lower power
state where the information of system
configuration and open applications/files is
saved to main memory that remains powered
while most other hardware components turn off
to save energy. The information stored in
memory will be used to restore the system
when a “wake up” event occurs.
S1/POS
S3/STR
Run VGABIOS if S3 Resume When ACPI Suspend Mode is set to S3 or
S1&S3, users can select the options in this
field. Selecting [Yes] allows BIOS to call
VGABIOS to initialize the VGA card when
system wakes up (resumes) from S3 sleep
state. The system resume time is shortened
when you disable the function, but system will
need an AGP driver to initialize the VGA card.
Therefore, if the AGP driver of the card does
not support the initialization feature, the display
may work abnormally or not function after
resuming form S3.
Auto, Yes, No
Power Management This item is used to select the degree (or type)
of power saving and is related to these modes:
Suspend Mode and HDD Power Down.
Min Saving: Minimum Power Management.
Suspend Mode=1 Hour
Max Saving: Maximum Power Management.
Suspend Mode=1 Min
User Define: Allows end users to configure
each mode separately.
User Define
Min Saving
Max Saving
Video Off Method This determines the manner in which the
monitor is blanked.
V/H SYNC+Blank: This selection will cause
the system to turn off the vertical and
horizontal synchronization ports and write
blanks to the video buffer.
Blank Screen: This option only writes blanks
to the video buffer.
DPMS: Initial display power management
signaling.
DPMS
V/H SYNC+Blank
Blank Screen
Video Off In Suspend This option enables the monitor to be turned off
during the suspend mode.
Yes
No
Suspend Type This item allows you to select he suspend type
for system power management.
Stop Grant
PwrOn Suspend
MODEM Use IRQ This determines the IRQ in which the MODEM
can use. Activity of the selected IRQ always
awakens the system.
3, 4, 5, 7, 9, 10, 11, NA