Filter
Top Products
Chapter 3 71
Removing the Internal Cables/Connectors and Memory
1. Disconnect the main power connector from the main board.
2. Disconnect the 12-voltage power connector from the main board.
.
3. Disconnect the FDD cable, ODD cable and HDD cable from the main board.
4. Press the leavers on the both sides of the DIMM socket outward to release the DIMM, and then gently pull
the DIMM out to remove it.
5. Disconnect the front panel audio connector from the main board.
6. Disconnect the two front USB connectors from the main board.