Filter
Top Products
78 Chapter 3
Removing the Internal Cables/Connectors and Memory
1. Disconnect the main power connector from the main board.
2. Disconnect the 12-voltage power connector from the main board.
.
3. Disconnect the FDD cable, ODD cable and HDD cable from the main board.
4. Press the leavers on the both sides of the DIMM socket outward to release the DIMM, and then gently pull
the DIMM out to remove it.
Removing the CPU Fan Sink and CPU
1. Disconnect the CPU fan connector from the main board.
2. Remove the two latches on both side of the fan sink.
3. Remove the CPU fan sink from the main board.