Filter
Top Products
76 Chapter 3
Disassembling the Veriton 5600GT/V
Opening the Housing
This section tells you how to open the housing cover when you need to install additional components inside
the system unit.
CAUTION: Before you proceed, make sure that you have turned off the system and all peripherals connected
to it.
Removing the Housing
1. Remove the two screws holding the upper cover.
2. Slide the upper cover out and then gently pull it outward to detach it from the housing.
.
Removing the ODD/FDD/HDD
1. Remove one screw holding the bracket holder.
2. Remove the bracket holder as the picture shows.
3. Disconnect the ODD cable and ODD power cable from the ODD.
4. Pull the ODD lock and then detach the ODD from the frame.