Filter
Top Products
82 Chapter 3
Disassembling the Veriton 3600GT/V
Opening the Housing
This section tells you how to open the housing cover when you need to install additional components inside
the system unit.
CAUTION: Before you proceed, make sure that you have turned off the system and all peripherals connected
to it.
Removing the Housing
1. Remove the three screws holding the upper cover.
2. Slide the left cover out and then gently pull it outward to detach it from the housing.
.
Removing the FDD/ODD/HDD
1. Lift up the FDD/HDD/ODD frame carefully.
2. Disconnect the FDD cable and FDD power cable from the FDD.
3. Disconnect the ODD cable and ODD power cable from the ODD.