Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7182
1U Rackmount System
1-3 Server Chassis Features
The following is a general outline of the main features of the RMC7182 chassis.
System Power
When configured as a Acnodes RMC7182, the embedded system chassis includes a single 560W
power supply.
SATA Subsystem
For the RMC7182, the motherboard chassis was designed to support four SAS or SATA hard drives,
which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot- swap capability of the
SAS drives (there is no system support for SATA drives).
Control Panel
The embedded system's control panel provides important system monitoring and control information.
LEDs indicate power on, network activity, hard disk drive activ- ity and system overheat conditions.
The control panel also includes a main power button and a system reset button. The front of the chas-
sis also includes a COM port and two USB serial ports for easy access.
I/O Backplane
The SC113MTS-560C is a short-depth, 1U rackmount chassis. Its I/O backplane provides three PCI
slots, one COM port (the other is internal), one VGA port, two USB ports, PS/2 mouse and keyboard
ports, two Ethernet (LAN) ports and a UID LED.
Cooling System
The embedded system chassis' revolutionary cooling design has been optimized to provide sufficient
cooling for dual CPU configurations. The chassis includes four
4-cm counter-rotating PWM (Pulse Width Modulated) fans located in the middle of the system. There
is a "Fan Speed Control Mode" in BIOS that allows chassis fan speed to be determined by system
temperature.