Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7182
1U Rackmount System
1. After removing the plastic cap, use your
thumb and the index finger
to hold the CPU at the north and south center
edges.
2. Align the CPU key (the semi-circle cutout)
with the socket key (the notch below the gold
color dot on the side of the socket).
3. Once the CPU and the socket are aligned,
carefully lower the CPU straight down into the
socket.
Do not rub the CPU against the surface of the
socket or its pins to avoid damaging the CPU
or the socket.
4. With the CPU in the socket, in- spect the
four corners of the CPU to make sure that it sits
level and is properly installed.
5. Once the CPU is securely seated in the
socket, lower the CPU load plate to the socket.
6. Use your thumb to gently push the socket
clip down to the clip lock.
Important! Please save the plastic cap. The
motherboard must be shipped with the plastic
cap properly installed to protect the CPU
socket pins. Shipment without the plastic cap
properly installed may cause damage to the
socket pins.