Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7182
1U Rackmount System
5-6 Installing Memory Modules
Note: Check the Supermicro web site for recommended memory modules.
Installing & Removing DIMMs
1. Insert the desired number of DIMMs into the memory slots, starting with DIMM1A. Insert each DIMM
module vertically into its slot. Pay attention to the notch along the bottom of the module to prevent incor-
rect DIMM module installation.
2. Press down the release tabs on the ends of a memory slot. Insert each DIMM module vertically into its
slot. Pay attention to the notch along the bottom of the module to prevent inserting the DIMM module
incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the slot. Repeat for all modules.
4. Reverse the steps above to remove the DIMM mod- ules from the motherboard.