Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7182
1U Rackmount System
5-5 Installing the Processor and Heatsink
When handling the processor package, avoid placing direct pressure onthe label area of
the fan.
Notes:
1. Always connect the power cord last and always remove it before adding, re- moving or changing any
hardware components. Make sure that you install the processor into the CPU socket before you install
the CPU heatsink.
2. Intel's boxed processor package contains the CPU fan and heatsink assem- bly. If you buy a CPU
separately, make sure that you use an Intel-certified multi-directional heatsink and fan only.
3. Make sure to install the motherboard into the chassis before you install the
CPU heatsink and heatsink fan.
4. When purchasing an LGA1366 processor or when receiving a motherboard with an LGA1366 pro-
cessor pre-installed, make sure that the plastic CPU cap is in place and none of the CPU pins are bent;
otherwise, contact your retailer immediately.
5. Refer to the Supermicro web site for more details on supported CPUs.
Installing an LGA1366 Processor
1. Press the socket clip to release the load plate,
which covers the CPU socket, from its locked posi-
tion.
2. Gently lift the socket clip to open the load plate.
3. Hold the plastic cap at its north and south center
edges to remove it from the CPU socket.
Note: The photos on this page and succeeding
pages are for illustration purposes only. They do not
necessarily reflect the exact product(s) described in
this manual.