Filter
Top Products
58
Actiontec Wireless-Ready DSL Gateway User Manual
DSL Settings
To access
DSL Settings, select
DSL Settings from the “Utilities” screen. The
Gateway’s
VPI, VCI,Mode, and QoS (Quality of Service) settings can be changed
from here. Actiontec recommends not changing these values without consulting
the
ISP.
Restore Default Settings
To r estore the Gateway to its factory default settings, select Restore Default
Settings from the “Utilities” screen. When the “Restore Default Settings”screen
appears, click Restore Default Settings.Any changes made to the Gateway’s settings
will be lost and the factory default settings will be restored. During this process, the
Gateway’s power
LED flashes and the Gateway is disabled.
War ning:Do not unplug the power adapter from the Gateway
during the Restore Default Settings process. Doing so may result
in permanent damage to the Gateway.
When the power LED stops flashing and glows steadily green, the Gateway is fully
operational.