Filter
Top Products
11
Step 5 Click OK to copy the Wave Device .INF file from the A:\ drive to the
hard drive.
Step 6 To determine what COM port and IRQ is assigned to the modem in Win-
dows 95, click on the Modems icon in Control Panel and select the
Diagnostic tab. Click on the COM Port icon and then on the More Info
button to view the modem properties.
CONFIGURING WINDOWS 95 OEM SR2
Step 1 Upon start-up, Windows 95 detects the modem and launches the Update
Device Driver Wizard dialog box. Insert the diskette (or CD-ROM)
containing the modems .INF files and click Next >.
Step 2 After Windows 95 has found the updated drivers for your modem, click
Finish.
Step 3 If Windows asks for an installation disk, click OK and type A: (or the
CD-ROM drive letter) in the dialog box that appears and click OK.
Step 4 After the Wizard has copied the .INF files to the hard disk, it should
detect Wave Device for Voice Modem and prompt for its driver. Click
Next>.
Step 5 Click Finish to copy the Wave Device .INF file from the A:\ drive (or
CD-ROM) to the hard drive.
Step 6 To determine what COM port and IRQ is assigned to the modem in Win-
dows 95, click on the Modems icon in Control Panel and select the
Diagnostics tab. Select your modem and then click on the More Info
button to view the modem properties.
Step 7 Remember this COM port number. When you install your Data/Fax soft-
ware or internet browser program, you may need to set your softwares
modem port location to this same number.
CONFIGURING WINDOWS 98
Step 1 Turn on the computer and load Windows 98. Windows 98 will detect
new hardware and start building the driver database.
Step 2 An Add New Hardware Wizard should appear. Insert the installation