Filter
Top Products
9
5. Firmly, but gently, insert the modem into the available 16-bit expansion slot.
Ensure that the card is seated properly before securing it with the screw re-
moved in Step 4, as shown in the following diagram:
Fig. 6: Installing The Modem
6. Put the chassis cover back on the computer.
7. Be sure that all power switches are in the OFF position, then reconnect the
power cables to the computer and its peripherals.
8. Connect the telephone line cable to the Line (Telco) jack as shown in Fig.7.
9. Turn on the computer and proceed to the following sections to configure
your modem to the operating system you are using.
Caution. Always discharge static electricity before handling your modem.
You may discharge static electricity by touching a grounded metal structure
or by using any commercially available grounding strap.
Make sure the expansion slot type is 16-bit, which has two slots to fit the ISA
card. 8-bit slots have only one connector. If you use an 8-bit slot, the modem
will not have access to the higher interrupts (IRQ 9-15).
The position of the expansion slots in your computer may differ from the
illustrations shown but the installation procedure should be the same.