Filter
Top Products
4-8
ANA-5910/5930/5940 User’s Guide
Installation for Windows NT (version 3.51)
This sectiondescribes installation of Lan Emulation (LANE) client
device drivers for a Windows NT ATM server using version 3.51.
Installing LANE Device Drivers
LANE client drivers are installed from the Network Settings dialog
box in the Control Panel. Up to 4 drivers (numbered 0 to 3) can be
installed at one time. To install multiple drivers, you must install
driver 1 (0) before any additional drivers.
Installing a First or Single LANE Client Driver
To install the LANE driver for the first emulated LAN
1
In the Control Panel window click on the Network icon.
2
From the Network Settings dialog box, select Add Adapter .
3
Select <Other> Requires disk from manufacturer from the
bottom of the Network Adapter Card drop-down list, and then
select Continue.
4
Insert the ALANE Drivers for Windows NT diskette in the
diskette drive.
5
Type the drive letter of the diskette drive that contains the
ALANE Drivers for Windows NT diskette, and then select OK.
6
Select Adaptec Inc. ATM LANE Adapter, and then select OK.
The Adaptec LANE Configuration dialog box appears.