Filter
Top Products
5-20
ANA-5910/5930/5940 User’s Guide
necessary TCP/IP data, select OK. If you do not have TCP/IP
installed, these configuration screens will not appear.
11
Add additional clients by following the above procedures, or
select Restart Now to save and initialize changes.
reconfiguring a LANE Client
To reconfigure a LANE client:
1
In the Program Manager’s Main group window, select the
Control Panel icon.
2
Select the Network icon.
3
Select the LANE adapter you want to reconfigure, for example,
Adaptec LANE Adapter (ELAN 0), and then select Configure.
The Adaptec LANE Configuration dialog box appears.
4
Set the editable parameters as described in the above sections.
5
Select Restart Now to save and initialize changes.
Removing a LANE client
1
In the Program Manager’s Main group window, select the
Control Panel icon.
2
Select the Network icon.
3
Select the LANE adapter you want to remove, such as Adaptec
LANE Adapter (ELAN 0), and then select Remove.
4
Select Yes.
5
In the Network Settings dialog box, select OK.
6
Select Restart Now to save and initialize changes.