Filter
Top Products
5-13
Installing ATM Version 2.0x Drivers for Windows NT
Installation for Windows NT (version 3.51)
The procedures below describe installation of ATM, Classical IP
(CIP), and Lan Emulation (LANE) client device drivers for a
Windows NT ATM server using version 3.51. To ensure correct
device configuration, install these drivers in the following order:
■
Classical IP (CIP) client drivers
■
LANE drivers
■
CIP ARP server (optional drivers, purchased separately)
Installing CIP Client Drivers
To install CIP client drivers
1
In the Program Manager’s Main group window, select the
Control Panel icon.
2
Select the Network icon.
3
Select Add Adapter.
4
Select <Other> Requires disk from manufacturer from the
Network Adapter Card drop-down list, and then select
Continue.
5
Insert Device Driver for Windows NT Disk 1 in the diskette drive.
6
Type the drive letter of the diskette drive that contains Device
Driver for Windows NT Disk 1, and then select OK.
7
Select Adaptec Inc.ATM ANA-59x0 Adapter(CIP), and then
select OK.