Adaptec ANA-5930 Network Card User Manual


 
5-9
Installing ATM Version 2.0x Drivers for Windows NT
Installing the CIP ARP Server (Optional)
If your workstation will function as the ATM CIP ARP server, you
must install the CIP client software (which must be purchased
separately) and the ATM CIP ARP server driver. Follow the
procedures below to install the ATM CIP ARP server software.
1
From the Control Panel window, double-click on the Network
icon.
2
From the Network Settings dialog box, select the Protocol tab.
3
Click on Add to add a protocol.
4
Select the Have Disk button.
5
Insert the RFC 1577 CIP ARP Server diskette in the diskette
drive.
6
Type the drive letter of the diskette drive that contains the RFC
1577 CIP ARP Server diskette, and then select OK.
7
Select Adaptec ATM ARP Server, and then select OK.
The Adaptec ATM ARP Server Configuration dialog box
appears.