Filter
Top Products
1-7
Introduction
Overview of the Installation Process
The following steps provide an overview of the process of
installing and configuring the ASA-7211 adapter:
1 Verify that your computer meets the requirements described in
System Requirements on page 1-4.
2 Gain familiarity with the contents of the Adaptec iSCSI
installation CD.
3 Install the Adaptec iSCSI adapter as described in Chapter 2.
4 Install the appropriate driver for your operating system as
described in Chapter 3.
5 Connect a Ethernet cable with the appropriate connector type
(either copper or fibre) and establish network connectivity
between your adapter and your targets.
6 Install the iConfig utility and use it to configure your network,
as described in Chapter 4, Configuring Your iSCSI System.
ASA-7211 IG.book Page 7 Tuesday, February 11, 2003 10:04 AM