Adaptec ASA-7211C/F Network Card User Manual


 
4-5
Configuring Your iSCSI System
Changing Your iConfig Password
The default user ID is admin. The default password is adaptec.
To change the default password:
1 From the Main Menu, select User Logout and Login Password.
For details, see the Main Menu illustration on page 4-4.
2 Select User Password Change.
3 To complete the change, follow the iConfig instructions.
Configuration Tasks
The following table summarizes the configuration tasks you can
perform using iConfig. The menu options all appear in the Main
Menu illustration on page 4-4.
For additional information, refer to the iConfig Utility User’s Guide.
To perform this task... Use this Menu Option...
View controller and target info 1. Display Properties
View and set controller, Ethernet,
SLP, and ISNS properties
View and set login parameters
2. Setup Properties
View, add, edit, delete, and rescan
targets
3. Device and Targets
View, add, and delete routing,
DNS, ARP, and Host table entries.
4. Routing, DNS, and ARP
View port transmission statistics,
event messages, initiator login,
iSCSI session statistics and iSCSI
node portal info
5. Statistics, MIB, and Event Log
Erase or save ROM settings
Upgrade firmware
6. Firmware and ROM
Logout
Change your password
7. User Logout and Login
Password
Save settings 8. Immediate Save Settings
ASA-7211 IG.book Page 5 Tuesday, February 11, 2003 10:04 AM