Filter
Top Products
4-3
Configuring Your iSCSI System
Running iConfig on Red Hat Linux
1 Login as root.
2 To mount the Adaptec iSCSI installation CD, enter:
mount /dev/cdrom /mnt/cdrom
3 To change to the
Linux directory on the CD, enter:
cd /mnt/cdrom/”Configuration Utilities”/Linux
4 To copy the utility to your local hard drive, enter:
cp -v iconfig /sbin
5 Enter iconfig
6 At the login prompt, enter the default user ID, admin
7 At the password prompt, enter the default password, adaptec
The iConfig Express Setup instructions are displayed.
Now that you have started iConfig, proceed to Using Express Setup
to Configure Your iSCSI Adapter on page 4-4.
ASA-7211 IG.book Page 3 Tuesday, February 11, 2003 10:04 AM