Filter
Top Products
3-5
Installing the Initiator Mode Driver
Windows NT 4.0
The following driver installation scenarios are described:
■ Installing the Driver in Windows NT 4.0
■ Updating the Driver in Windows NT 4.0
Installing the Driver in Windows NT 4.0
To install the driver:
1 Install your Adaptec iSCSI adapter according to the instructions
in Chapter 2.
2 Start Windows and log in with administrative privileges.
3 Insert the Adaptec iSCSI installation CD.
4 Open the Windows Control Panel.
5 Double-click SCSI Adapters.
6 Click the Drivers tab.
7 Click Add.
8 Click Have Disk.
9 Click Browse and then browse to
WinNT40 driver folder on the
installation CD.
10 Click Open.
11 Click OK.
12 Click Adaptec Storage Accelerator 7211 (NT 4.0).
13 Click OK and follow all Windows instructions. Windows will
prompt you to reboot your computer.
Updating the Driver in Windows NT 4.0
To update the driver, you must first remove the driver. To remove
the driver:
1 Open the Windows Control Panel.
2 Double-click SCSI Adapters.
3 Click the Drivers tab.
4 Choose the appropriate driver from the list box.
5
Click the controller identified as an
Adaptec Storage Accelerator 7211
.
ASA-7211 IG.book Page 5 Tuesday, February 11, 2003 10:04 AM