Filter
Top Products
4-4
ASA-7211C/F Installation Guide
Using Express Setup to Configure Your iSCSI Adapter
Now that you have started iConfig, you are ready to run iConfig
Express Setup to configure your adapter (initiator).
Note: In any menu, press Esc to get back to the previous menu.
When you run iConfig for the first time, you automatically enter
Express Setup, and you are prompted to enter the following
information for the initiator:
■ IP address
■ Subnet mask
■ Gateway address
■ iSCSI initiator name
Now that your initiator is configured, you can choose from these
options:
■ Allow iConfig to discover your targets automatically—iConfig
locates and configures targets and displays target information.
■ Enter target information manually—You are prompted to enter
the following information for each target:
■ Target DNS name or IP address
■ Port number
■ iSCSI target name
After you enter this information, save your settings. The Main
Menu is displayed as shown below.
ASA-7211 IG.book Page 4 Tuesday, February 11, 2003 10:04 AM