Filter
Top Products
3-2
ASA-7211C/F Installation Guide
Windows 2000
The following driver installation scenarios are described:
■ Installing the Driver in Windows 2000
■ Updating the Driver in Windows 2000
Installing the Driver in Windows 2000
To install the driver:
1 Install your Adaptec iSCSI adapter according to the instructions
in Chapter 2.
2 Start Windows and log in with administrative privileges.
The Windows Found New Hardware Wizard automatically
detects the new hardware.
The adapter is identified as a
PCI Memory Controller. Later, it will
be identified as a
SCSI and RAID controller in the Device Manager.
3 Click Next.
4
Select
Search for a suitable driver for my device (recommended)
and then click Next.
5 On the Locate Driver Files window, select CD-ROM drives.
6 Insert the Adaptec iSCSI installation CD and then click Next.
7 On the Driver Files Search Results window, select Next and
follow the on-screen instructions to install the driver.
8 If the Digital Signature Not Found window displays, click Yes
to continue.
9 On the Completing the Found New Hardware Wizard window,
click Finish.
10 After the driver installation is finished, the Found New
Hardware Wizard window displays a second time, requesting
that you install the Adaptec ASAMGMT Processor Device.
Click Yes.
ASA-7211 IG.book Page 2 Tuesday, February 11, 2003 10:04 AM