Filter
Top Products
3-3
Installing the Initiator Mode Driver
The driver has been installed. The system does not require
rebooting. To verify the driver installation, open the Device
Manager and view the driver, as shown below.
Updating the Driver in Windows 2000
To update the driver:
1 Open the Windows Device Manager.
2 Expand SCSI & RAID controllers.
3 Right-click the controller identified as an Adaptec Storage
Accelerator 7211 and choose Properties.
4 Select the Driver tab.
5 Click Update Driver and then click Next.
6 Click Display a list... and then click Next.
7 Click Have Disk.
8 Click Browse and browse to the
Win2000 driver folder on the
CD.
9 Click Open and then click OK.
ASA-7211 adapter
ASA-7211 IG.book Page 3 Tuesday, February 11, 2003 10:04 AM