Filter
Top Products
2-2
ASA-7211C/F Installation Guide
5 Insert the adapter in the PCI expansion slot. Press the board
firmly into the slot until it clicks into place. Replace the slot
cover screw.
Note: Some ASA-7211 adapters are manufactured with
jumpers “hanging,” but not installed, on jumper
connectors J4 and J5. Do not install these jumpers.
6 Close the computer cabinet and reattach the power cord.
Next, install the appropriate software driver for your operating
system. See Chapter 3, Installing the Initiator Mode Driver.
ASA-7211 IG.book Page 2 Tuesday, February 11, 2003 10:04 AM