Filter
Top Products
Provisioning LTPH-UM-1109-01, Issue 1
12 January 9, 2002 H2TU-C-231 List 2
Figure 3. Logon Screen
Most VT100 emulation programs support a print screen option. For Windows-based programs,
such as Procomm or HyperTerminal, do the following:
1 Highlight the screen that you wish to print.
2 Click File,thenPrint.
3 In the Print dialog box, choose Selection as the Print Range.
4 Click OK to print.
For printing procedures for other programs, contact the appropriate vendor.
Table 4. Logon Screen Menus
Press this
key:
To access this
menu:
Menu Functions
Monitor Monitors loopbacks and alarms, and provides a graphical representation of circuit activity,
including ES, UAS, SES, and line code.
Performance Provides performance and alarm histories for current, 25-hour, 48-hour, or 31-day periods
for either the DS1 or HDSL2 interface.
Event Log Identifies the 100 most recent system events and reports the date and time of occurrence.
Config Provides standard configuration options, ADC options, BER tester (BERT), date and time
setting, and a reset option (factory settings). Also provides a master clear option that clears
all performance, alarm, and event log entries. Selecting the Config menu after a remote logon
displays the BERT Generator menu, which provides access to the BERT Signal Generator
configuration submenu.
Inventory Provides product information about the various devices that are in the system and lists circuit
and device identifications.
Report Provides four types of reports: Full Report, Short Report, System Information Report, and
Event Report.
Continued
Circuit ID Number Date and Time Logon Device System Status
Menu bar
Monitor Performance Event Log Config Inventory Report Rlogon Help
+------------------------------------------+
||
| ADC DSL Systems, Inc. |
| HiGain HDSL2 |
||
| Voice: 800.638.0031 |
| Fax : 714.730.2400 |
+------------------------------------------+
ID: xxxx--xxxx--xxxx—-xxxx 09/01/2001 12:30:01 H2TU-C System: OK___
M
P
E
C
I
O