Filter
Top Products
LTPH-UM-1031-03, Issue 3 Provisioning
H4TU-C-319 List 1 September 12, 2003 15
PROVISIONING TASKS
After the H4TU-C-319 is successfully installed, perform these basic provisioning tasks:
1 Set the date and time (see “Setting Date and Time” on this page).
2 Set the circuit ID numbers (see “Setting Circuit ID Numbers” on page 16).
3 Make any desired changes to configuration (see “Configuring the System” on page 17).
4 Clear history, alarm, and event log screens to remove miscellaneous data during startup (see “Clearing the
History, Alarm, and Event Log Screens” on page 24).
Setting Date and Time
Figure 4. Config Menu - Date and Time
1 Press to select the Config menu.
2 Use the and arrow keys to select Date and Time, then press .
3 Type the date in the format indicated, then press .
4 Type the time in the format indicated (entering seconds is optional), then press .
M
onitor Performance Event Log Config Inventory Report Rlogon Help
+----------------------+
|
Standard Options -> |
| ADC Options -> |
| BERT Generator -> |
|
Date and Time -> |
+-------------------------------+
| Date (mm/dd/yyyy):
02/01/2002|
| Time (hh:mm[:ss]): 12:30:01 |
+-------------------------------+
ID: xxxx--xxxx—-xxxx--xxxx 02/01/2002 12:30:01 H4TU-C System: OK___
C
↑ ↓
ENTER
ENTER
ENTER