Filter
Top Products
LTPH-UM-1237-04 Using This Manual
HRM-238 List 1 July 21, 2004 iii
USING THIS MANUAL
The following conventions are used in this manual where applicable:
• Monospace type indicates screen text.
• Keys you press are indicated by small icons such as or . Key combinations to be pressed
simultaneously are indicated with a plus sign as follows: + .
• Items you select are in bold.
The following types of messages, identified by icons, may appear in text.
For a list of abbreviations used in this document, refer to “Appendix C - Abbreviations” on page 15.
INSPECTING SHIPMENT
Upon receipt of the equipment:
• Unpack each container and inspect the contents for signs of damage. If the equipment has been damaged in
transit, immediately report the extent of damage to the transportation company and to ADC
Telecommunications, Inc. Order replacement equipment, if necessary.
• Check the packing list to ensure complete and accurate shipment of each listed item. If the shipment is short
or irregular, contact ADC as described in “Appendix B - Product Support” on page 14. If you must store the
equipment for a prolonged period, store the equipment in its original container.
Notes provide information about special circumstances.
General cautions indicate the possibility of personal injury, product failure, or equipment
damage if instructions are ignored or not completely followed.
An Electrostatic Discharge (ESD) caution indicates that a device or assembly is susceptible
to damage from electrostatic discharge.
An electrical shock warning indicates the presence of a dangerous level of electrical power
and the potential for serious personal injury or equipment damage.
Y ENTER
CTRL ESC